MCSE 70-290 Certification Primer

Each certification level has certain exams associated with it. You can decide the appropriate certification exam based on your experience, skills, and interests.

Benefits of Microsoft Certifications

Pre-Requisite Experience (Recommended) for Microsoft Certifications

To pursue this certification you should have at least 1 year of experience in:

Significance of Microsoft Certifications for Microsoft Windows Server 2003

Microsoft has developed independent certification requirements for Microsoft Windows Server 2003. An aspirant can certify directly for MCSE/MCSA in Windows 2003 if they are new to certification process. If the aspirant is already a certified MCSE /MCSA in Windows 2000, then they can follow the upgrade path for MCSEs in Windows 2000 to secure Windows 2003 Certifications. If the aspirant certifies in MCSE for Windows NT4.0, they can earn MCSE in Windows 2003 by following the upgrade path for MCSEs in Windows NT4.0.

The exams are slightly more challenging than their Windows 2000 counterparts, but they will actually test your hands-on knowledge since that is the most important part of ensuring that a certification is credible.

Exam 70-290: Managing and Maintaining a Microsoft Windows Server 2003 Environment

Exam 70-290 is the first in the series of the core exams for MCSE certifications.

When you pass the Managing and Maintaining a Microsoft Windows Server 2003 Environment (MCSE 70-290) exam, you achieve Microsoft Certified Professional (MCP) status. You also earn credit toward the following certifications:

• Core credit towards Microsoft Certified Systems Administrator (MCSA) on Microsoft Windows Server 2003 certification

• Core credit towards Microsoft Certified Systems Engineer (MCSE) on Microsoft Windows Server 2003 certification

MCSE 70-290 exam objectives are:

Objective 1: Managing and Maintaining Physical and Logical Devices

In this objective you will need to demonstrate expertise in managing and maintaining physical and logical devices. As an administrator, you should understand Basic and Dynamic disks, RAID configuration and troubleshooting, driver signing, and the use of tools, such as Device Manager and Hardware Troubleshooting Wizard. Familiarize yourself with Device Manager and the warning and disabled icons found when problems are present on installed devices.

Objective 2: Managing Users, Computers, and Groups

This objective includes many topics, so you should be prepared to face many questions that fall into this category. Have a healthy introduction to profile management, user and group accounts, permissions, and troubleshooting. Practice a lot on GPOs and perform a variety of administrative tasks, including configuration of desktop settings, control of security settings, assignment of scripts, redirection of folders, and software distribution. Also, get a clear understanding on inheritance and filtering.

Objective 3: Managing and Maintaining Access to Resources

Knowing how to configure, monitor, audit and troubleshoot NTFS permissions based issues are one of those most important areas that you need to know this concept thoroughly and also be sure to brush up on your share permissions and share/NTFS permissions interaction. Do not forget to brush up on how folder and file permissions can change or stay the same when copying or moving within a drive or between drives.

Objective 4: Managing and Maintaining a Server Environment

In this objective you'll find questions from topics, such as Event Viewer, System Monitor, software updates (including the functionality of Microsoft's Software Update Service or SUS), Remote Assistance, disk quotas, print queues, performance objects and IIS 6.0. Spend time understanding IIS topics around Web sites, Virtual and physical directories, files and host and cname records in DNS. New to Windows Server 2003 is SUS. Understand clearly how SUS is used for deploying and managing client and server critical updates.

Objective 5: Managing and Implementing Disaster Recovery

In this objective you'll find questions on ASR, VSS, backing up files and system state data, configuring security for backup operators, verifying backup jobs, managing media, restoring and scheduling backups and recovering from server hardware failures. You should take some extra time to get familiar with the various types of backups that Windows Server 2003 supports, as well as the various configuration options that are available to you. Practice making backups of different types and then practice restoring them.

MCSE 70-290 Exam Model

Most of the questions in the MCSE 70-290 exam are multiple choice type. The questions require the "best" answer from several close responses. Other questions may present an implementation scenario, requirements, and a proposed solution and then ask if the solution meets all of the requirements or combinations of the primary and secondary requirements. Microsoft has introduced some testing innovations for the certification exams. These question types present a more realistic visual representation of the tasks a MCSE would do in future. These are:

• Hot Area Questions - This type of question requires indicating the correct answer by selecting one or more elements within a graphic.

• Active Screen Questions - This type of question asks you to configure a dialog box by changing one or more elements.

• Drag and Drop Questions - This type of question asks you to drag source objects to appropriate targets within a work area.

• Build List and Reorder Questions - This type of question asks you to indicate the correct answer by building an answer list. In a Build List and Reorder question, you need to build a list by dragging the appropriate source objects to the answer list and then placing them in the correct order based on criteria defined in the question.

• Create a Tree Questions - This type of question asks you to create a tree structure. You indicate the correct answer by dragging source nodes to the correct locations in the answer tree. Nodes consist of text and a small icon.

• Windows Simulation Questions - This type of question asks you to indicate the correct answer by performing specific tasks such as configuring and installing network adapters or drivers, configuring and controlling access to files, and managing hardware devices. Many of the tasks that systems administrators and systems engineers perform can be presented more accurately in simulations than in most traditional exam question types.

You can get hands-on experience on new set of questions that are available in Whizlabs MCSE 70-290 Exam Simulator. This will help you plan your study regime to ensure success.

Passing Score

Microsoft has normalized scoring for all MCP exams, so the same passing score applies to all exams. 700 is now the minimum passing score for all MCP exams. However, the maximum score (which used to top out at 1000) varies per exam, depending on the complexity of the skills measured.

Time Limit

The exam duration is 175 minutes with 45 questions. You will have plenty of time to answer the exam questions, so there is no need to rush. If you have spare time available, you can double check the questions and ensure that you have read them correctly and actually answered the question as intended.

Exam Result

Instead of reporting results based on major categories for exam objectives as it used to, Microsoft is now providing numerical scores and bar graphs for "skills clusters". Visually, the bars in the exam report show you how well you fare in each skills cluster. If bars that represent cluster scores are close to one end of the graph, they indicate stronger skills; bars near the other end indicate weaker skills. Please store your exam results in both paper and electronic format for later reference.

Sample Questions

Question 1

You are a systems administrator for TicTacToe Toy Manufacturers. All servers in the company run on Microsoft Windows Server 2003. The company's Active Directory infrastructure consists of a single domain hosted on two domain controllers named Tic1 and Tic2.

Tic2 experienced a hard disk failure, and hence has been taken offline. Tic2 remained offline for some days while all Active Directory updates were made to Tic1. You proceed to restore the data from backup while ensuring that the latest Active Directory changes are replicated to Tic2.

How should you restore the lost data from backup?

Choices:

Correct Choice: B

Explanation:

Choice B is the correct answer.

During a normal restore operation; Backup operates in non-authoritative restore mode. That is, any data that you restore, including Active Directory objects, will have their original update sequence number. The Active Directory replication system uses this number to detect and propagate Active Directory changes among the servers in your organization. Because of this, any data that is restored non-authoritatively will appear to the Active Directory replication system as though it is old, which means the data will never be replicated to your other servers. Instead, if newer data is available from your other domain controllers, the Active Directory replication will update the restored data. Hence, choices A, C, and D are incorrect.

Question 2

You are a systems administrator for Blueberry Packaging Industries. All servers in the company run on Microsoft Windows Server 2003.

You create a folder named Custom Package on the company's file server to contain the company's files. You share this folder as Custom Package. The folder is configured with default NTFS permissions and default share permissions. The file server is located in a secure room.

Within the shared folder, Managers should be able to add and change files and subfolders. Employees in the Sales and Packers department should be able to change and delete files and subfolders. All other employees should only be able to view the files.

All Sales employees are members of the Sales domain local security group. All Managers are members of the Managers domain local security group. The Packers are members of the Packers global security group.

How should you modify share level permissions on the Custom Package folder so that the appropriate users have the minimum required privileges? (Choose all that apply)

Choices:

Correct Choices: A, C, and E

Explanation:

Choices A, C, and E are the correct answers.

Change permissions allow the users to create, delete, and change any files and folders in the shared folder, provided the users have appropriate NTFS permissions on the files and folders. The default NTFS permission in Windows Server 2003 is Read for Everyone and the default share level permissions grant Read access to Everyone. You should not remove Everyone from the share permission list. By default, share level permissions grant Read access to Everyone.

How to Prepare for Microsoft Certification?

Following are the steps to prepare for Microsoft certification.

• Automated System Recovery (ASR)

• Diskpart utility

• Diskraid utility

• Emergency Management Services (EMS)

• File Replication Service (FRS)

• Group Policy Management Console (GPMC)

• Open File Backup

• Password Backup and Restore Wizard

• Remote Assistance

• Remote Desktop

• Shadow copying of shared folders

• Software Update Services (SUS)

• Virtual disk service

• Permissions -Share and NTFS

• Users, Computers, and Groups

You've learned the details about the MCSE 70-290 Exam, its pattern, objectives etc. Download the MCSE Exam Preparation Guide to learn how Whizlabs can help you achieve the MCSE credential.

Resources

Exam simulators

Whizlabs MCSE 70-290 Exam Simulator

Besides identifying your weak areas and giving you a feel of the exam environment, Whizlabs Exam Simulator nurtures your potential to acquire domain expertise so that you not only succeed in your certification exam but succeed in your career too.

Articles on Windows 2003

Microsoft Online Resources

About The Author

Whizlabs (http://www.whizlabs.com), an ISO 9001:2000 certified company, is a leading provider of IT skill assessment and certification exam preparation tools. Whizlabs' suite of offerings include "IT Certification Exam simulators and Instructor-led, Online Trainings" for various exams by Sun, IBM, Oracle, Microsoft, PMI, BEA, Cisco, and other leading IT vendors. Whizlabs also offers "IT Skill Assessment Management Solution" for Corporations, Training Institutes, and Universities.

Whizlabs provides "24x7 customer support" to be able to assist its clients at all times. The customer care team at Whizlabs is dedicatedly working towards achieving 'total customer satisfaction'. The clients can get in touch with this team through phone, e-mail (support@whizlabs.com), and online chat (LIVE CHAT feature provided at www.whizlabs.com). This would help the clients get a real time solution to their queries.

In its first three years of inception, Whizlabs has helped over 380,000 software professionals in realizing their dream of acquiring IT Certifications of their interest.

Whizlabs offerings have fuelled the career growth of IT professionals working in 321 Fortune 500 companies spread in 118 countries across the globe.